Info About Using the Halo Triton Tank Electronic Cigarette & Safety

Triton Tank E-Cig Starter Kit FAQ & Troubleshoot Guide


Where to find Triton Instruction Manual online?

If you dont have the manual for Triton Kit, it can be downnloaded from the link:
Triton Tank System Instruction Manual Download>

How does Triton Tank Coils Resistance work? How to choose the right Coil Resistance?

Triton tank coils come with different resistance and customers have the options to choose the most appropriate resistance according to their needs. The coils are available in 1.8 - 2 ohms, 2.2 - 2.4 ohms, 2.6 - 2.8 ohms, 3 - 3.2 ohms.

The coil resistance choice depends on the user and also the e liquid. Higher resistance Triton Coils vape cooler and lower resistance coils vape hotter.

If you are experiencing burnt vapour, you might need to change to higher resistance coils. Using the info above you can buy the right levels of coil resistance.

Why does the Triton Battery light flash when I try to vape?

It might be due to few reasons. Most common reason may be that the battery is down and needs recharging. Another reason may be that the coil has not been properly screwed or your coil is damaged. Coil needs to be replaced if this happens.

Why triton battery shuts off when I try to vape?

The coil may have been worn out and needs replacement. Putting the battery back to charge will bring the battery back to ON. However it will switch off again if you do not replace the coil.
 
Why am I not getting any vapour from the Triton?

 Check if you have overfilled the tank due to which the liquid has reached the battery. The hole is for air passage and any liquid that gets into the hole will reach the battery and vapour production may stop. Just unscrew the battery and wife it. You may need to blow the mouth tip to get rid of e-liquids that may have entered.
 
Can Triton Batteries be charged with a Halo G6 USB?

No you should not charge G6 battery with Triton Charger as they don’t have same voltage. Using wrong charger may shorten the battery life significantly and cause permanent harm to the battery.

Is the wall charger for Triton and G6 different?

No. Wall chargers are same for all halo products. It can be used in combination with either G6 or Triton USB chargers.

Just got the triton tank kit but battery seems to be not working. How do I fix it?

The triton battery may be in switched off mode when you first get it so you need to press the button on the battery 5 times continuously to get started. This process is not required each time and the battery will remain switched ON after this.

How do I switch the Triton Battery OFF? Do I need to do this after vaping each time?

Triton batteries are OFF when you first get it and you need to press the battery button 5 times to switch it ON. After this, there is no need to switch it back to OFF mode as leaving it ON will not affect battery life. It won’t harm the battery as the battery is in use only when you are press the battery button when vaping.

However, it might be a good idea to switch it off by pressing the battery button 5 times when placing the battery in a bag or pocket to prevent the button from being pressed which may result in over heating of battery and the coil may get damaged.

Should I fill the Triton tank completely?

You should not fill the tank completely as this may result in leakage and may block the flow of air. Tank should be filled below the air passage hole in the triton tank. It’s best to have the level up to the last calibrated mark.
 
 
Why I am getting burning taste? Do I need to replace the triton coil?

A slight burning taste may be experienced from time to time with certain e-liquids, but this does not necessarily mean the coil must be replaced. Triton Tanks work best when the liquid level is higher than the coil. For best performance, the e-liquid in the tank should be kept above the 2 ml mark. Loosening the canter coil assembly very slightly may also help with slight burning.
 
Why am I having trouble with vapour production in Triton Tank?
 
If your tank is producing no vapour at all, tighten the canter coil assembly by turning it clockwise. The coil should be snug, but not overtightened.

Tank should be kept at optimal level below the coil hole level. The hole in the triton tank is for air passage and any liquid that gets into the hole will reach the battery and vapour production may stop. Just unscrew the battery and wife it. You may need to blow the mouth tip to get rid of e-liquids that may have entered.

Why am I having trouble with vapour production in Triton Tank?

If your tank is producing no vapour at all, tighten the centre coil assembly by turning it clockwise. The coil should be snug, but not overtightened.
 
BATTERY TROUBLESHOOTING:
 
If your Triton battery is not working as expected, please use the following troubleshooting tips.
 
- BATTERY TURNED OFF
 
Ensure that your Triton battery is turned “on” by clicking the button 5 times in rapid succession.
 
- CONDENSATION ON CONNECTOR
 
Wipe with a dry napkin if any liquid is present on the centre post of the battery connector. - IMPROPER USB ADAPTER Use only the Triton USB adapter for charging, as other USB adapters may reduce the battery lifespan significantly due to voltage differences.
 
Other Information

CHARGING TRITON BATTERY:

The Triton battery needs to be recharged when the LED button blinks multiple times in succession during inhale. You may also notice a slight decrease in vapour production as your battery approaches this drained state. Once the blinking occurs, or vapour production stops completely, you should recharge the Triton battery using one of the methods outlined in the next section. Each Triton battery will typically function for 480 to 1350 puffs per charge, depending on the capacity of the battery purchased. Each battery can be charged and used up to 300 times. After more than 300 charges and usage cycles, the usage time lessens significantly.
 
CHARGING TIME:

Most Triton batteries will arrive pre-charged and ready for use. Once the battery is drained, you will need to charge it again before using. During normal charging, your Triton battery should remain plugged in for 1-2 hours depending on the capacity of the battery. The light on the USB Adapter will turn from red to blue when the Triton battery is fully charged and ready for use.

REPLACEABLE COIL DESIGN:

The Triton Tank is designed with a replaceable centre coil assembly. This coil assembly contains the heating element, and can be easily replaced. This replaceable coil design offers significant cost savings over replacing the entire tank.
 
WHEN TO REPLACE THE COIL ASSEMBLY:

If you experience a sustained burnt taste when vaping, or your tank is no longer producing vapour, it may be time for a replacement. At this time, you can replace just the coil assembly or the entire tank. Please read the troubleshooting section at the end of this manual, as these symptoms may not necessarily indicate that the coil assembly has reached its lifespan.
 
WHEN TO REFILL TANKS:

The Triton system will perform best when the tank contains 2ml of e-liquid or more continuously. This ensures the heating element will remain moist and extend the overall life of the coil. The Triton can certainly be used with lower e-liquid volumes in the tank, however the system then depends on the wicks to absorb liquid into the coil.
 
STORAGE:

The Triton Tank System, e-liquid and other accessories should be kept out of reach of children and pets, and stored safely in a dry environment. Do not store in high-temperature areas, as this will cause irreversible damage to batteries and other accessories.
 
OVERHEATING:

 If the Triton System vaporizes continuously or shows any signs of overheating, stop usage immediately and unscrew all parts. CHARGING: Do not use the charger in damp areas or near a high-temperature heat source. If the power supply emits any odour or heat, is discoloured, or experiences any unexpected issues while charging, unplug it immediately

If you are looking to buy anything for your existing e-cig kit, you can buy your e cig products online