Tracer Mod Starter Kit FAQ & Troubleshooting Guide
Why is my Tracer Tank Leaking? How to re-fill Tracer vape tank to prevent leaks?
If your rector or Tracer Mod Tank is leaking, please follow the following steps. Below is the correct process to fill your reactor and tracer tanks.
1. Close the Airflow Vent
2. Remove Cap from Tank
3. Fill the tank with VG Juice about ¾ of the way full.
4. Wipe off any excess juice from the cap area
5. Once filled, reattach the tank’s cap by lining up the threads and slowly twisting clockwise until snuggly fastened.
6. Turn Tank Upside down (mouthpiece facing down)
7. Open Air Vents
8. Tank is ready to use
How to turn on the tracer battery?
You can turn ON the tracer Mod battery, click the firing button on the side of the battery five times in rapid succession. The button’s backlight will blink five times to indicate the Tracer has been successfully turned “on.”
Should I turn off my Tracer before storing it?
It is best to turn the battery off before storing it although the battery does not drain if you leave it on.
How/Where to store tracer battery?
This device should be kept out of reach of children and pets and stored safely in a dry environment. Do not store in high-temperature areas as this will cause irreversible damage to batteries and other components.
The backlight on my Tracers Firing Button is blinking, what does this mean?
The Tracer’s firing button backlight will display the amount of battery life remaining.
How to re-charge the tracer mod battery?
To charge your Tracer, attach the small connector of the USB cable into the charging port of the Tracer battery. The larger end of the cable should then be inserted into a computer or other USB compatible power source, or can be used in conjunction with the provided Wall Charger.
How do I know my Tracer is charging?
Once connected to a power source, the Charge Indicator at the bottom of the unit will glow red. When the unit is fully charged the red light will blink five times and then go out.
What is the charging time for tracer battery?
3.5 hours for a fully drained battery.
How to fill tracer Mod Tanks?
Refilling the Tracer tank is easy. First, unscrew the entire tank from the battery. Once removed, hold the tank with mouthpiece side down and unscrew the Base from the Chamber by turning counter-clockwise. Next, hold the Chamber on a slight angle and pour E-liquid into the tank along the glass side.
When should I refill my tank/ much much e liquid?
The Tracer tanks perform best when filled with at least 2 ml of E-liquid continuously. This ensures the heating element remains moist during use and will extend the overall life of the coil head. It is recommended that tanks be refilled once the E-liquid level drops below the top of the coil head.
Which e liquid to use with halo tracer mod?
For best performance, please use VG type e liquid.
What is adjustable airflow?
The Tracer tank is equipped with an adjustable airflow system allowing the user to control the amount of air taken in. A wider air hole creates a “looser” draw that results in cooler vapor. A narrow air hole creates a “tighter” draw with warmer vapor. To adjust airflow, twist the ring on the base hardware left or right to change the size of the air hole.
When should I replace my coil head?
If you experience a sustained burnt taste when vaping, or if your tank is no longer producing adequate vapor, it may be time for a replacement. It is also recommended to change your coils when switching between E-liquids to ensure there is no carry over of old flavors.
How do I replace my coil head?
To replace a coil head, first unscrew the entire tank from the battery. Once the tank is removed, hold the tank with mouthpiece side down and unscrew the Base from the Chamber. Once the Base is remove the coil head will be exposed. Unscrew and remove the old coil head from the Base by turning counter-clockwise. Dispose of the old coil head, ensuring it is kept out of reach of children and pets. Attach a new coil head to the Base by lining up the threads and turning clockwise until snug. The Base should then be re-attached to the Chamber.
When should I clean my tank?
Your tank should be cleaned on a regular basis to remove any residue that may collect inside the Chamber. It is also highly recommended that you clean the tank when switching between E-liquids to ensure there is no carry over of old flavors.
How do I clean my tank?
To thoroughly clean the tank, each individual component should be disassembled. First, unscrew the entire tank from the battery. Once removed, hold the tank with mouthpiece side down and unscrew the Base from the Chamber by turning counter-clockwise. Dispose of any remaining E-liquid. Unscrew and remove the coil head from the Base by turning counter-clockwise. Dispose of the coil head or place it in a safe place for later use. Remove the mouthpiece and rinse all components (except for the coil head) under warm water until all E-liquid has been removed. A cotton swab may be used to remove any remaining liquid.